N-tert-butyl-2-benzothiazole sulfinamide

2024-05-06by admin0

N-tert-butyl-2-benzothiazole sulfenamide structural formula

Structural formula

Physical competition number 028Y
Molecular formula C11H14N2S2
Molecular weight 238.38

accelerator NS,

N-(1,1-dimethylethyl)-2-benzothiazole sulfinamide,

N-tert-butyl-2-benzothiazole sulfenamide,

accelerator TBBS,

Accelerator NS,

N-(1,1 – dimethyl-ethyl) -2 – benzothiazolyl Asia sulfonamide,

N-tert-butyl-2-benzothiazolyl sulfenamide,

accelerator TBBS,

Slow-acting sulfenamide accelerator

Numbering system

CAS number:95-31-8

MDL number:MFCD00022873

EINECS number:202-409-1

RTECS number:DL6200000

BRN number:158370

PubChem ID:None

Physical property data

1. Properties: The industrial product is light yellow or tan powder.

2. Relative density (g/mL, 20℃): 1.26-1.32

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 105-110

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, KPa): Undetermined Determined

7. Refractive index: Undetermined

8. Flash point (ºC): 165

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg, ºC): Undetermined

12. Saturated vapor Pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) distribution coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Easily soluble in benzene, methylene chloride, tetrahydrofuran Carbon chloride, ethyl acetate, acetone, ethanol, soluble in gasoline, insoluble in water, dilute acid, dilute alkali solution.

Toxicological data

1. Acute toxicity: Rat oral LDLo: 7940mg/kg; mouse abdominal LD50: 5mg/kg; mouse intravenous LD50: 180mg/kg; rabbit skin contact LD50: >7940mg/kg;

2. Mutagenicity

Mouse lymphocyte mutation: 40mg/L;

Rat embryonic morphological transformation: 35mg/L;

Ecological data

Slightly harmful to water.

Molecular structure data

1. Molar refractive index: 70.43

2. Molar volume (cm3/mol): 194.9

3. Isotonic specific volume (90.2K ): 526.1

4. Surface tension (dyne/cm): 53.0

5. Polarizability (10-24cm3): 27.92

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 3

5. Number of tautomers: none

6. Topological molecule polar surface area 78.5

7. Number of heavy atoms: 15

8. Surface charge: 0

9. Complexity: 215

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Avoid contact with oxides.

Storage method

Save sealed in a cool, dry place away from direct sunlight. Make sure the workspace has good ventilation. Keep sealed. Keep away from sources of fire and store away from oxidizing agents.

Synthesis method

By2-Thiobenzothiazole (acceleratorM) obtained by reacting sodium salt with tert-butylamine. to0.5molof13%AcceleratorM slowly added to the sodium salt solution0.75molTertiary butylamine, add after half an hour0.36molof25%Sulfuric acid solution, in45-50℃ reaction0.5h. Again2h<span style="font-family:宋体;FONT-SIZE 0.6mol15%Sodium hypochlorite. After the reaction, cool, filter and wash, 50 Products dried below ℃.


Can be used for the after-effects of reclaimed rubber of natural rubber, butadiene rubber, isoprene rubber, styrene-butadiene rubber and natural rubber Sex enhancer. This product has the advantages of excellent scorch resistance and short vulcanization time, that is, there is no danger of scorch at the operating temperature, but it has a strong promotion effect at the vulcanization temperature, especially in natural rubber, which has greater aftereffects. This product requires zinc oxide and stearic acid, and can also be activated by thiuram, dithiocarbamates, aldehydeamines, guanidine accelerators and acidic substances. This product has slight contamination and almost no discoloration. It can be used to make light-colored or bright-colored rubber products, mainly used to make tires, rubber shoes, hoses, tapes, cables and general industrial products.


Leave a Reply

Your email address will not be published. Required fields are marked *